WAS LED module LM7 24 volts - 7 functions

This WAS LED module is a load controller for all light functions.
99% of the possible canbus failures will be resolved.
The canbus box can also be used for all dynamic turn signals in the DD series from WAS.
Comes with an input cable of 1m and an output cable of 1m.

Features

1. Turn signal left
2. Turn signal right
3. Position light left
4. Position light right
5. Brake light
6. Reversing light
7. Fog light

Specifications

• Protected against overcurrent up to 400 mA
• Added extra power:
  • Position lights 4 W
  • Brake light 40 W
  • Turn signals 21 W
  • Reversing light 21 W
  • Fog lamp 21 W
• Minimum current detected:
  • Position lights 10 mA
  • Brake light 50 mA
  • Turn signals 50 mA
  • Reversing light 50 mA
  • Fog lamp 50 mA
• 8-pin cable (1 m in and 1 m out)
• Dimensions 106 x 230 x 33 mm
• E20 - R10 approval

Connection diagram:

• White - Mass
• Yellow - Turn signal left
• Green - Turn signal right
• Black - Position light left
• Brown - Position light right
• Blue - Fog light
• Grey - Reversing Light
• Red - Brake Light