M-LED Tri-color flash Amber/Red/Green E-mark

Unique model with no less than 3 different colours.

This flasher is a stylish built-in warning light, designed as part of the equipment for heavy equipment and work machines. It is extremely suitable for mounting on the back, side or bumper of the vehicle.

The flasher is equipped with 6 LEDs per colour, in 3 different colours. You can choose to use 1 colour, but also a combination of 2 or 3 colours. When using 1 colour, there is a choice of 20 flash patterns. When using 2 or 3 colours, you can choose from 12 patterns.

Thanks to the thin fixture and the design, it fits neatly into the vehicle. In day mode, the warning light is bright enough to be easily noticed in daylight, while in night mode the power is reduced.

If desired, multiple lamps can be connected to each other, then the lamps can be synchronised with each other. The lighting is approved for road traffic according to the ECE R65XA2 standard. The light is also protected against radio interference according to the R10 standard.

The article is supplied with a 3M strip for quick mounting and a cover for screw mounting. The length of the cable is 2m.

Specifications:

• Voltage: 10-30V
• Number of LEDs: 3 x 6
• Type of LED: 3W
• Light colour: Amber, Red and Green
• Flash patterns: 1 colour 20 patterns, 2 or 3 colours 12 patterns
• Dimensions: 118 x 25 x 7 mm
• Weight: 45 g
• Cable length: 2m
• Approvals: EMC R10, R65XA2
• Water resistance: IP67

Connection diagram:

• Black: Mass
• Red: Color 1
• Blue: Color 2
• Gray: Color 3
• Yellow: Synchronization, change of operating mode, reset
• White: Alternative synchronization
• Green: Night mode