WAS LED module LM7 12 volts - 7 functions

This LED module from WAS is a load controller for all light functions.
99% of canbus failures will be solved by this.
The module can also be used for all dynamic turn signals in the DD series from WAS.
Supplied with a 2.5 m input cable and a 0.5 m output cable.

Functions:

1. Turn signal left
2. Turn signal right
3. Position light left
4. Position light right
5. Brake light
6. Reversing light
7. Fog light

Specifications:

• Protected against overcurrent up to 750 mA
• Added extra power:
  • Position lights 4 W
  • Brake light 40 W
  • Turn signals 21 W
  • Reversing light 21 W
  • Fog lamp 21 W
• Minimum current detected:
  • Position lights 10 mA
  • Brake light 50 mA
  • Turn signals 50 mA
  • Reversing light 50 mA
  • Fog lamp 50 mA
• 8-pin cable (2.5 m in and 0.5 m out)
• Dimensions 106 x 230 x 33 mm
• E20 - R10 approval

Connection diagram

• White - Mass
• Yellow - Turn signal left
• Green - Turn signal right
• Black - Position light left
• Brown - Position light right
• Blue - Fog light
• Grey - Reversing Light
• Red - Brake Light