Strands Wireless switch panel with lighting

The Cruise light wireless controller is the first control panel that controls all vehicle lighting at the touch of a button. The controller fits all vehicles and can control all vehicle lighting, but has been specially developed to control the Strands Cruise Light roof sets. It's all possible thanks to the supplied relay box, with six different output channels, a total of 700W. 2x 150W (15A) intended for 2 Cruise Light Roof bars that can be synced and 4x 100W (10A) for each type of vehicle lighting.

The output channels can be controlled with the wireless controller or the signal cable. Use the controller wirelessly with batteries (4x AAA, not included), or place it anywhere in your cabin and connect the controller with the included USB cable. The relay box can withstand harsh environments, is waterproof, has an IP rating of IP67 and the rubber gaskets protect the cables.

The wireless controller is color coordinated, nine buttons are amber, eight are white and one is blue. The amber buttons are for the Cruise Light roof kits and can control the bar functions, such as changing the patterns or turning them on and off. For most functions, the button is highlighted on the active functions and the roof bar patterns are also displayed on the surrounding LEDs. You also get buttons for approval by day mode, night mode and cruise light mode.

The three buttons, left, center and right, are used for traffic advisory, flashing right to left, center out and left to right. The blue button turns all connected lights on and off, and the lights return to the same state before going off using the built-in memory function. Pressing for three seconds will enable all channels.

Do you also want to switch on lighting with an external signal cable? This is possible by using the signal cable connections. For example, connect the reversing lamp to one of the four channels with a signal wire and use the wireless controller to use it as a work lamp. This way you can easily switch your lamp on and off in two ways.

Specifications

• Voltage 10-35 VDC
• Channels: 6, total 700W. 2x 150W (15A) for Cruise Light Roof set + 4x 100W (10A) for any other lighting
• Water resistance: IP67
• Display dimensions: 162 x 81 x 20 mm
• Controller dimensions: 208 x 105 x 32.5 mm
• Certification: ECE R10
• Beach article number: 850208